features glass passivated chip, high reliability low forward voltage drop insulation voltage 2500v small size and light weight small thermal resistance, high thermal conductivity,low temperature rise applications power supply of dc equipment input rectifier for pwm converter dc motor maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60hz, resistive or inductive load.for capacitive load, derate current by 20% v oltage ratings characteristics symbol unit peak repetitive voltage v rrm v peak non-repetitive reverse voltage v rsm v forward conduction characteristics symbol unit maximum average forward rectified current @t c =110 peak forward surge current t=8.3ms at 60hz i fsm a i 2 t rating for fusing i 2 t a 2 s reverse peak current v r =v rrm @t j =25 a v r =v rrm @t j =150 ma rms lsolation voltage from case to lead v iso v typical thermal resistance (note1) r jc /w mounting torque m3 m d n.m weight w t g thermal characteristics operating temperature range t j storage temperature range t stg 2.the typical data above is for reference only( ?). rev. 2, 16-mar-2017 notes:1.thermal resistance junction to case. dimensions in inches and (milimeters) i f(av) i r v a 35 maximum forward voltage drop per element at 17.5a peak -55 to +150 2500 -55 to +150 3 10 0.8 0.8 5 sgbj35 series reverse voltage - 800 to 1600 volts forward current - 35 ampreres glass passivated 3 phase bridge rectifiers v f 1.1 660 400 -08 -10 -12 -16 800 1000 1200 1600 900 1100 1300 1700 SGBJ3508 sgbj3510 sgbj3512 sgbj3516 sgbj 1.391(35.3) 1.367(34.7) 0.299(7.60) 0.291(7.40) 0.299(7.60) 0.291(7.40) 0.299(7.60) 0.291(7.40) 0.299(7.60) 0.291(7.40) 0.031(0.80) 0.024(0.60) 0.162(4.10) 0.154(3.90) 0.150(3.80) 0.146(3.70) 0.221(5.60) 0.213(5.40) 0.993(25.2) 0.977(24.8) 0.808(20.5) 0.800(20.3) 0.154(3.90) 0.146(3.70) 0.022(0.55) 0.018(0.45) 0.061(1.55) 0.057(1.45) 0. 1 6 9( 4. 3 0 ) 0. 1 62 ( 4 . 1 0 ) 0.033(0.85) 0.030(0.75) 0.187(4.75) 0.183(4.65) 0.053(1.35) 0.049(1.25) 0.140(3.55) 0.136(3.45)
rating and characteristic curves the cruve graph is for reference only, can't be the basis for judgment( ?)! rev. 2, 16-mar-2017 sgbj35 series t c ,case temperature average forward current amperes fig.1-forward current derating curve 50 100 0 150 35 17.5 0 fig.3-maximum non-repetitive peak forward surge current number of cycles at 60hz peak forward surge current, amperes 0 100 200 300 400 1 2 5 10 20 50 100 percent of rated peak reverse voltage,(%) instantaneous reverse current ,(ua) fig.4-typical reverse characteristics single half sine-wave jedec method 100 10 1.0 0.1 20 40 60 80 100 1000 t j =100c t j =25c t j =50c t j =125c t j =25c pulse width 300us instantaneous forward current, amperes fig.2-typical forward characteristics instantaneous forward voltage. volts 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0.1 1.0 10.0 20.0 0 0.2 t j =25c t j =50c t j =75c t j =125c
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
